Convenience and quality of an AeroBed® mattress combined with the height of a traditional bed.
The AeroBed® Raised has all the convenience and quality of the AeroBed® plus the added height of a traditional bed. The powerful attached pump inflates the bed in less than 3 minutes. It is ideal for those who prefer the feel of a regular height bed and for those individuals who may have difficulty getting up from a mattress that is placed directly on the floor. AeroBed® Raised is the next best thing to giving your guests your own bed.
What's included
AeroBed® Raised comes with its own exclusive external electric pump system, our patented One Touch® Comfort Control and a convenient storage bag. The pump and valve are backed by a one-year limited express warranty. All size Raised beds fit standard size deep-fitted sheets.
Attached Pump System
The powerful external pump features the patented One Touch® Comfort Control, and will inflate the bed in less than 3 minutes. The pump is a UL listed 120-volt pump, 60 Hz, 1.7 Ampere, with a standard U.S. two pronged plug and 9ft cord.
- Size: Twin, 74"L X 39"W X 20"H, 450 lb weight capacity, 22 lb item weight
- At 20", AeroBed® Raised is twice the height of the original AeroBed mattress.
- Ideal for guests who prefer to sleep higher off the floor and need the height of a regular bed.
- Patented technology fully inflates in under 3 minutes with our exclusive external attached pump.
- Quick and easy deflation in under one minute with our patented air release valve.
- One Touch® comfort control for easy inflation and firmness control.
- The sleep surface is plush and velvety.
- Fits standard size sheets.
- AeroBed® Raised is made of puncture-resistant, heavy-gauge, poly-vinyl chloride (PVC). The material is non-allergenic, and is electronically welded at the seams for superior strength and durability.
- Special pyramid construction has a wider base for added stability.
- Bed rolls up around the pump and stores compactly in the included durable carry bag.
- Two-tier construction keeps the bed sheets in place and takes standard size sheets.
- Backed by a one-year limited express warranty.
Testimonials - Every day AeroBed® gets letters and emails from customers telling us how delighted they are with their AeroBed products. Here are just a few examples of satisfied owners:
"The light and airy quality of the mattress has, quite literally, made
sleeping a dream. Not only does it offer superior comfort, but it also has the
ability to be adjusted to any soft or firm level."
-K.M., Swarthmore, PA
"Two years ago I purchased a queen size aero mattress.
My family and I have thoroughly enjoyed your product. The portability and ease of set-up are wonderful."
-P.R., Lawrenceville, NJ
"We slept on our new queen size Raised AeroBed last night. Wow! This is what we were looking for! Wonderful nights sleep! Blows up quick and deflates great! Thank you for a great product!"
-C.W., via email
"Hello, my name is J.P. I am 27 Years old and I am a former pro wrestler. During my time in the ring I have injured my back on several occasions. I received your raised queen size bed and I love it. It has helped me tremendously!! I have never slept so well in my life. I am going to use this bed on a regular basis. Maybe it will help me get back into the ring. Thanks again and keep up the good work!!"
-J.P., Vincennes, IN
| |
AeroBed Classic Raised Frequently Asked Questions (FAQ)
|
| |
| 1.
|
Dimensions
|
| |
Twin: 74" L X 39" W X 20"H; supports up to 450 lbs. Item weight: 22 lbs.
Full: 74"L X 54"W X 20"H; supports up to 650 lbs. Item weight: 27 lbs.
Queen: 78"L X 60"W X 20"H; supports up to 750 lbs. Item weight: 31 lbs.
Thickness of PVC: 18 gauge
|
| |
| 2.
|
Material
|
| |
The AeroBed is made of puncture-resistant, 18 gauge, heavy-duty poly-vinyl chloride (PVC). The material is non-allergenic, and is electronically welded at the seams for superior strength and durability.
|
| |
| 3.
|
Cleaning
|
| |
The AeroBed is made of puncture-resistant, heavy-duty vinyl. It is non-allergenic, non-stainable and cleans up with soap and water or mild household cleaners. Do not use strong chemicals to clean your bed. Allow your AeroBed to air dry completely after cleaning and before storing.
The AeroBed mattress cover is made of a cotton and polyester blend. Machine wash in warm water with mild detergent. Tumble dry on low heat. Do not dry clean.
|
| |
| 4.
|
General Care and Maintenance
|
|
|
1. Inspect your AeroBed prior to each use.
2. Keep your bed away from any sharp objects. Large cuts or snags may not be repairable and will not be covered by your AeroBed warranty.
3. When not in use, store your bed in a clean, dry place out of extreme temperatures.
4. In case of incidental damage to your bed, a repair kit with instructions is included with each bed. Please follow repair kit instructions carefully. Additional vinyl repair kits can be purchased through Technical Assistance.
|
| |
| 5.
|
Important safety information and warnings
|
| |
It is your responsibility to read and always follow the safety, care and maintenance instructions for your AeroBed. Always instruct and supervise others on the proper use, maintenance and safety of your bed.
IMPORTANT: Preparation of your AeroBed requires no tools. Use of tools may damage your bed.
1. WARNING: Adult supervision required. Follow all safety instructions to avoid serious injury.
2. Remove all sharp objects from area where bed will be set up and used.
3. Do not use this product on abrasive surfaces or near pointed/sharp items or surfaces. Protruding objects may puncture mattress.
4. The mattress is made of PVC and therefore may melt or burn if it comes in contact with any flame or heat source. Do not place it near or against heaters, open flame or other hot objects.
|
| |
| 6.
|
Usage Conditions
|
| |
Your AeroBed is meant to be used as an extra bed, but is durable enough to sleep on every night. Once the AeroBed has been inflated and adjusted for comfort, the pump can be unplugged from the wall and the bed used outside. Do not allow the pump to get wet. Allowing the pump to get wet will void your warranty. Your AeroBed is not a toy and is not meant to be used as a flotation device.
The AeroBed is made of heavy duty puncture resistant PVC. However, avoid leaving sharp objects near the AeroBed due to the risk of punctures. Be sure to use the AeroBed on a flat surface without any sharp points that can puncture the bed. In addition, the AeroBed is engineered to support several hundreds of pounds of weight, however, we do not recommend jumping on the AeroBed or using the AeroBed as a trampoline or toy.
|
| |
| 7.
|
Trouble shooting
|
| |
Problem: Bed has a broken part
Your AeroBed and pump are guaranteed to be in perfect condition when you receive it. The bed and pump are also guaranteed to perform under normal usage conditions for one year from the date of purchase. If, upon purchase, you discover your bed or pump is in some way defective, or if a part breaks within the warranty period, contact Aero Consumer Services, or return it to the place of purchase for a refund. All parts are replaceable.
Problem: Air Release Valve is broken
If your valve is damaged (e.g., the tab has broken off), you can request a new valve, please contact Aero Consumer Services.
Problem: Product is leaking air.
Possible reasons and solutions . . .
1. Air is leaking from the Air Release Valve. If air is leaking from Air Release Valve, carefully remove the round black plastic gasket (or white silicone gasket, depending on model) inside the Air Release Valve cover.
Rinse this gasket in warm water for 10 minutes, then cool and towel dry.
Re-insert gasket in the valve cover, making certain that the side of the gasket with the U-shaped groove faces into the cover. Leave valve in open position for approximately 30 minutes. Then close and proceed with inflation instructions.
2. Air is leaking from a puncture or tear in the product.
If you have a puncture or tear in your product, it may be possible to repair the damage by using the Vinyl Repair Kit included with your product. Follow all instructions and heed all warnings included in the repair kit.
To obtain a new vinyl repair kit, contact Aero Consumer Services.
Problem: Bed won't inflate.
Possible reasons and solutions . . .
1. The Air Release Valve is open. If the valve is open, close it by using two thumbs to push cover and snap it into valve.
2. The pump is not plugged in. Plug pump into any 110 Volt AC electrical outlet (220V product sold outside North America).
|
| |
|
